Benno Utility Rear Rack #1 Plus is a direct fit to the Benno Boost E bikes. The 66cm x 18cm platform allows the use of up to 2 Yepp Easyfit Baby seats without adaptor. The rack is rated to carry up to 130lbs of kids, gear, or any combination of both. - Dimensions: Deck 18cm x 66cm (W x L) - Max load 130lbs/60kg - Fits two Yepp Easyfit baby seats without adapter - Weight: 2300g - Fits Benno Boost E bikes
The Benno Utility Front Tray rack mounts directly to the frame of Boost E, eJoy, eScout, RemiDemi and Carry On models, holding up to 45lbs of cargo. - Max load: 45lbs/20kg - Dimensions: 46cm x 32cm x 14cm (W x L x H) - Weight: 1740g
• Paddle cradles w/15mm straps keep your board safe and secure, easily removed when not needed • Shortboard rack features strong extruded aluminum clamp with durable anodized finish • Fist most bikes with seat post diameters of 25-32mm diameter and carries most surfboards up to 8' in length • Longboard rack with adjustable-length arms fit most 26" wheel bikes, lightweight alloy construction, 25kg/55lb capacity • Longboard rack fits most surfboards up to 10' in length (not designed for stand-up paddleboards) • Rust-resistant hardware
The Benno Mini Sideloader set extends the carrying capacity and convenience of the Boost E and Carry On bikes when used with select Benno Racks. The Sideloader allows the use of the large Utility Pannier bags, or when used with the Wheel Guard set creates a footrest for children riding on the rear rack. - Max Load 33lb per side. Maximum combined load of rack and Sideloaders not to exceed 110lbs - Sold in pairs - Fits Benno Boost E and Carry On models
The Benno Mini Front Tray rack mounts directly to the frame of Pre-2020 Boost E, eJoy, eScout, RemiDemi and Carry On models, holding up to 35lbs of cargo. - Dimensions: 28cm x 28cm x 6cm (W x L x H) - Max load: 35lbs/15kg
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.
Original replacement rack for Trek 1120. Product details - Color-matched for direct compatibility - Includes integrated rubber bumpers to help protect frame - Does not include mounting hardware Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: No - Includes light mount: No - Weight capacity: 15lbs (7kg) - Material: Aluminum
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie rear rack adds utility while still looking great. - Original equipment replacement rear racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Compatible with the Bontrager Interchange system - Max load rating is 55lbs (25kg) - Size: 700c - Material: Aluminum
Turn your bike into a touring or commuting beast with this bag-compatible, lightweight front rack that doesn't sacrifice strength or utility. The Lowrider front rack mounts directly to forks with fender eyelets or lowrider mounts to keep a low center of gravity when you load it up with your favorite gear. Includes threaded brackets for accessories. - Can be mounted to lowrider mounts or fender eyelets - Lowrider-style rack for secure and stable pannier mounting -Versatile design accepts lowrider and trunk style bags - Threaded accessory eyelets let you easily mount lights and other essential accessories - Includes hardware kit for mounting to both fender eyelets and lowrider mounts - Max load 33lbs
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.
A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs
Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie Commute front rack adds utility while still looking great. - Original equipment replacement front racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Max load rating is 20lbs (9.1kg) - Size: 700c - Material: Aluminum
The magic is in the mounting. MIK stands for Mounting is Key, and this rad rear rack comes equipped with this functionality. Because easy is the name of the game. Easy on, easy off. Carry your cargo in style. - MIK-compatible - Carrying capacity up to 25kg or 55lbs - Stainless steel hardware included - Rear rack designed to be compatible with most Electra 24" wheel models - Material: Aluminum
Genuine replacement parts. Custom-designed for Electra Sprocket models that look stylish and add carrying capacity. - Original replacement rack for Electra Sprocket - Aluminum construction - Weight capacity: 33 lbs (15 kg)
Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Rack 'em up! - Add carrying capacity while looking stylish. - Perfect for hauling your favorite belongings. Product details - Compatible with MIK accessories - Alloy heavy-duty 12mm diameter bars - Carrying capacity up to 25kg or 55lbs. - Stainless steel hardware included - Rear rack designed to be compatible with Electra Vale models
Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
Page 1 of 3 Next page