The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Electronic precision tool for sharpening and planing Plexiscraper blades. Fits 3, 4, and 5mm scrapers.

Electronic precision tool for sharpening and planing Plexiscraper blades. Fits 3, 4, and 5mm scrapers.

Ergonomically shaped surface structuring device with interchangeable structure roller for easily structuring of the running surface of cross country skis. Structuring significantly improves the sliding properties of skis. The device comes with the red roller (diagonal structure) for the mid snow temperature range.

Fixation device for cross country skis (skating and classic) with slightly larger support area than the Ski Vise Nordic. Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Good space saving alternative to a Cross Country Profile.

Fixation device for cross country skis (skating and classic) with slightly larger support area than the Ski Vise Nordic. Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Good space saving alternative to a Cross Country Profile.

Multifunctional, lightweight, stable wax table with 4 non-slip rubber feet - Adjustable height (87 cm, 85 cm or 75 cm), bench top 120 cm x 35 cm, weight 11 kg - Suitable for 2 XC Profile Sets for Wax Tables (5549890) - If this workbench is going to be used with a profile for waxing Nordic skis, the ONLY one that fits it is 5549890 XC Profile for Wax Tables

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Medium-hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - Wide range of use in medium snow temperature conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Soft high performance racing wax to meet the highest demands. The wax used by World Cup stars! features: - For high-moisture and wet snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Simple/ very compact fixation device for cross-country skis (skating and classic). Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Ideal for travelling.

Plastic profiles for cross-country skis fit Workbench Small (5549889) - Includes mount for fixing the binding - Suitable for classic and skating skis (lengths from 170 – 210cm) - Lightweight and stable, 1.4 kg

Protects the wax base during transport and is easy to prepare for the next training session. - Wide range of applications, 0°C to -10°C. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

BP099 is a soft wax with a low melting point. Recommended as the first layer on new skis. BP99 is also recommended for skis or snowboards in the “Hot Box”. The temperature in the Hot Box must never be higher than 55°C. Temperatures higher than 55°C may cause delamination of the base. - Soft wax with a low melting point - Recommended as the first layer on new skis. - Base prep wax.

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

For double roto-brushes! Roto handle/cover/driveshaft, For roto brushing, For everybody who uses roto brushes, easy to use. Roto handle with hexagonal drive shaft 140 mm and protection cover. For 140 mm brushes and double Roto brushes 70 mm + 70 mm.

Fluor Free Hydrocarbon wax -8°C to -14°C. Good race wax in very cold conditions. Good in dry conditions. - Durable wax for cold conditions - Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

Medium hard high performance liquid racing wax to meet the highest demands. Features: - Wide application range for common conditions in the medium snow temperature range - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the polishing brush liquid paraffin (5545251)

Soft high performance liquid racing wax to meet the highest demands. Features: - For high-moisture and wet snow conditions - Maximum water and dirt repulsion - Very long-lasting wax adhesion - Can also be used as adhesion promoter for top finish products - Fast processing - For brushing/polishing use the Polishing Brush Liquid Paraffin (5545251)

High Performance Powder to be applied after hot waxing for the highest race performance. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

Brush with steel-hair for cleaning oxidized bases or damaged structures prior to hot waxing. Also suitable for brushing out after hot waxing.

The marathon powder is the powder version of the well-known Maraton DHFF glide wax. Applying the powder is much easier than applying the marathon hard wax, as the powder melts more easily and is easier to scrape off. The abrasion resistance of the product is the same. The grain size of the powder has been thoroughly tested to achieve the best application result and performance for the product. Apply a good layer of powder onto the base, then run the iron over twice to ensure all the powder melts. The temperature of the waxing iron should be 160 degrees, and the speed of the iron should be about 5 to 7 seconds over the entire length of the ski. After cooling, scrape off the product using a plexi scraper and then brush with a steel or bronze brush, and finally polish using the blue nylon brush. - A favorite for classic long-distance races like the Birkebeiner - Powder version of the acclaimed marathon wax - The powder makes it easier to achieve an excellent result

For use with the Toko Structurite Tool and in conjunction with the Blue Roller .5 Screw Left

For use with the Toko Structurite tool and in conjunction with the Blue Roller .5 Screw Right

This tool should be used with the Toko Structurite and in conjunction with the Red 1.0 Screw Left.

This roller is to be used with the Toko Structurite Tool and in conjunction with the Red 1.0 Screw Right.

This tool should be used with the Toko Structurite and in conjunction with the Yellow Roller 1.5 Screw Left

This tool should be used with the Toko Structurite and in conjunction with the Yellow Roller 1.5 Screw Right.

Mount the Swix T0014HPS-2 on a drill with a minimum rotation speed of 1500 rpm. Then attach the brush to the handle. Move it in overlapping motions from the tip to the back.

For sharpening and smoothing plastic scraper blades. For 3, 4, 5 and 6 mm blade widths and 100 mm file.

Professional device for sharpening and smoothing plastic scraper blades. Suitable for 3, 4, 5 and 6 mm blade widths. Including 100 mm radial file. Can be screwed onto the table or a wooden board.

For brushing out hard and medium-hard paraffin waxes. - 6mm long bristles

- Performance Hot Wax for racing and training/ fluorine free - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

Liquid paraffin wax at the performance level for racing and training. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

Protects the wax base during transport and is easy to prepare for the next training session. A versatile hard glide wax. Used by Racing Service and ski factories as a transport wax and as an effective preparation for the next summer snow training session. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Very hard HydroCarbon powder wax to use as an additive in cold/ aggressive snow conditions. - With X-Cold Powder/ each wax becomes harder and more friction resistant - Powder form for easy ironing - For extremely cold/ dry snow conditions - Biodegradable

Structure steel insert for SWIX Super Riller. Fine 0.5 mm. - Structure steel insert - For Swix Super Riller structure tool - For cross-country skiers - High steel grade

Structure steel insert for SWIX Super Riller. Extra fine 0.25 mm. - Structure steel insert - For Swix Super Riller structure tool - For cross-country skiers - High steel grade

HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About liquid HS6: A liquid training and competition slide wax that can be used alone or as a base for racing products. Specifically designed for cold conditions down to -12°C. At lower temperatures than this, traditional waxes are usually better than liquid products. HS6L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. How to apply HS6L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. - Amazing universal glide wax - For training and racing - Improves ski glide - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions

Special base brush for polishing the skis after applying performance liquid paraffin wax.

Performance Hot Wax for racing and training, fluorine free. - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

Quick klister with applicator. Temperature range -5°C to +10°C. The solution when quick klister application is required, e.g. for variable Easter conditions. Ideal for applying when you need more wax when out on the trail. - Quick klister. - Temperature range -5°C to +10°C. - Universal klister. - Ideal for applying when you need more wax when out on the trail

Quick klister with applicator for soaked, coarse-grained snow, 0°C to +15°C. For those who prefer a simple, quick application with no mess. Ideal for applying when you need more wax when out on the trail. - From 0°C to +15°C. - Quick application. - Ideal for applying when you need more wax when out on the trail. - Red Wet Klister.

Allround, fluoro free kickwax for normal winter conditions. Fluoro free, purple-blue kick wax for normal winter conditions well below the freezing point. - Fluoro free kickwax. - A winner in the winter trails. - For racing - For new and new fallen fine-grained snow from -1°C to -5°C (30°F to 23°F). - Old/partly transformed snow from -3°C to -8°C (27°F to 18°F). Purple-blue kick wax is designed for normal winter conditions well below the freezing point. An obvious “next step” if VP40 does not provide a safe kick. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

For moist, newer snow around 0 degrees, or older snow right below zero. Fluoro free, dark purple kick wax for moist, new snow around zero, and for old, transformed snow just below the freezing point. - Fluoro free kickwax - Good water-repellent qualities - For racing - For new and new fallen fine-grained snow from 1°C to -2°C (34°F to 28°F). - Old/partly transformed snow from 0°C to -5°C (32°F to 23°F). Dark purple kick wax designed for moist, and new or new fallen snow around zero. Can also be used on older snow just below the freezing point without sacrificing glide. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

Perfect kickwax for moist, new snow, and shiny tracks. Fluoro free, purple-red kick wax that works well in moist new snow and shiny tracks. - Good water-repellent qualities. - Recommend to apply cold. - Fluoro free kickwax. - For racing - For new and new fallen fine-grained snow from 2°C to -1°C (36°F to 30°F). - Old/partly transformed snow from -1°C to -4°C (34°F to 25°F). Purple-red kick wax works very well in moist new snow and shiny tracks. Will also work on older, slightly transformed snow some degrees below the freezing point. If tricky conditions around zero VP65 is recommended. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). Applying the wax when it is cold will ease the application process. The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

For new and new fallen fine-grained snow from 0°C to -3°C (32°F to 27°F). Old/partly transformed snow from -1°C to -6°C (30°F to 21°F). Purple kick wax designed for conditions a few degrees below the freezing point. Provides perfect kick until you experience moderate shiny tracks. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who wants the optimum skiing experience. - VP-line from Swix - Kick wax - For training and competition - Fluoro free - Durable - Ski wax from Swix

An excellent wax for challenging conditions around zero degrees. For new and recent fine-grained snow from 0°C to 2°C. Old/partly transformed snow from 0°C to -4°C. Red/black grip wax with fantastic properties in difficult conditions around zero degrees. Also works well on the colder side at high humidity and transformed snow. The black additive is the guarantor for great flexibility and reduced risk of icing. VP65 works best with a couple of layers of a slightly harder wax as a base, and it also works very well for covering klister. Each layer is applied thinly and then smoothed out with a synthetic cork (T12). For a better result, it is recommended that the wax is cold when applied. The VP waxes are made primarily for top racers and serious skiers, but can be used by recreational skiers who want that little extra to get the very best wax for their ski trip. - Racing grip wax - Reduces risk of icing - Excellent dirt-repellent properties - Our second softest adhesive wax

Liquid paraffin wax to meet the high demands of junior racing and for training sessions in all disciplines. No shipping to Alaska (please buy locally). - Yellow for warm conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) - A good practice is to “aim cold” with these waxes. Blue is an excellent overall wax.

Green base klister that is used as the first layer of klister. Temperature range -15°C to +10°C. NB: Apply thinly. Then apply regular klister for the relevant conditions as the next layer. Spray nozzle that makes it easy to apply a very even and thin layer of klister. To apply the base klister, hold the can upside down and move it slowly along the base, on each side of the central groove, while spraying. Hold the can approx. 4-5 cm. above the base. Great for both racing and recreational skiing. - Green base klister - Easy to apply. - Hold the can upside down and move it slowly along the base to apply the klister. - Great for both racing and recreational skiing. - An alternative to KX20. - No iron needed.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Effective ski cleaner for removing grip wax and klister. - Ski clean aerosol with applicator - For cleaning skis - For ski waxers - Removes grip wax and klister