Practical plastic tool for removing wax residue in grooves on edges and sidewalls. The edge can be used to remove klister.
For clean removal of wax residue from grooves on ski base.
The Toko Plexi Blade Wax Scraper is a high-quality acrylic blade for cleaning your bases and scraping wax. Toko gave it a sharp edge that easily removes wax without damaging your bases like metal scrapers can.
Synthetic cork for corking Grip and Klister waxes.
Natural cork for corking Grip and Klister waxes and JetStream.
Natural cork with fleece Great liquid wax tool!
The nylon brush is an all round brush for alpine or nordic ski wax tuning. The bronze brush is designed to be the first brush used after scraping.
The Toko Horsehair Brush Bristles are quite fine, about 1/4 to 1/5 the size of a standard Nylon bristle (or the same size as the polishing brush bristles). At the same time, they are quite stiff and aggressive. These stiff, fine bristles make the Toko Horsehair Brush work well for removal of hard, cold weather waxes.
A metal groove scraper with two sizings (diameters): one for Rossi grooves and another for normal reasonably-sized grooves. This groove scraper will not wear out after heavy use and very rarely slips from the groove by accident. This saves you many accidental scratches on your skis over the course of the season
First brush AFTER waxing. Medium, steel bristles are angled to reduce abrasion on ski base. Excellent addition to brush quiver if bronze brush is not enough for your first brush Rectangular Hand Brushes are great for travel and as an economical way to build a selection of ski tuning brushes Always wear safety tuning gloves while brushing out ski bases to protect your hands from sharp edges Specs: Red Body/Stainless Steel Bristles with Black Nylon Border Rectangular Hand Brush: 3 x 5 inches: 10 mm length (0.2 mm diameter) Bristles
Toko 100mm Wide Rotocork Use instead of ironing 100% fluoro powders and soft hydrocarbon waxes. Use very low rpm and light pressure with overlapping strokes. Rotobrushes do not include shaft/handle. Either the Swix or Red Creek shaft/handles will work with these brushes.
For sharpening and smoothing plastic scraper blades. For 3, 4, 5 and 6 mm blade widths and 100 mm file.
For brushing out and cleaning dirty bases prior to waxing. Also suitable for brushing out after hot waxing. 17 mm (0,67 inch)
Toko / Red Creek Ski RotoBrush 100 mm Axle with Handle and Safety Shield/Hood Rotobrush control handle with built-in shield. _For 100 mm roto brushes. -Hexagon shaft rolls smoothly on sealed bearings. -Compatible with all SKS, Swix and Toko 100 mm rotobrushes. -When removing wax with brushes, brush tip to tail, -blowing/brushing the wax towards the tail. - Axle is not detachable. That feature is only available in the Swix model. -Toko Single Axle 100mm is made to cover brushes and includes a handle for easy use. A great addition to your ski shop, this single axle will help with the waxing and tuning process all winter long. -Specs:Axle with cover For 100mm brushes
- For optimal base cleaning prior to waxing. - Rotation rate max. 800 rpm. - Use the Single Axle with cover.
Powerful digital waxing device for professional use. The ergonomic design enables waxing in all directions. Infinite temperature adjustment from 212 °F to 320 °F, the inbuilt microprocessor controls temperature fluctuations. The extrastrong aluminum pressure cast plate for ideal heat storage has a curved rhomboid structure that improves the distribution of the wax and compression.
Electronic precision tool for sharpening and planing Plexiscraper blades. Fits 3, 4, and 5mm scrapers.
The 15mm thick base plate guarantees a constant temperature. The temperature of the wax iron is regulated and monitored by a micro processor. Heating zone from 90-180 degrees. In the rear area, the plate of the T18 is bent to simplify the application of JetStream 2.0. The front plate is flat to apply the gliding waxes evenly. The wax iron is especially suited for the handling of temperature-sensitive special and racing waxes.
Page 1 of 1