The 15mm thick base plate guarantees a constant temperature. The temperature of the wax iron is regulated and monitored by a micro processor. Heating zone from 90-180 degrees. In the rear area, the plate of the T18 is bent to simplify the application of JetStream 2.0. The front plate is flat to apply the gliding waxes evenly. The wax iron is especially suited for the handling of temperature-sensitive special and racing waxes.
Electronic precision tool for sharpening and planing Plexiscraper blades. Fits 3, 4, and 5mm scrapers.
The Toko Structurite Nordic Kit includes a structuring tool and three interchangeable rollers, so you can prepare the running surface of your cross-country skis to best suit the snow conditions. Each roller's color corresponds to the type of wax that compliments that roller's structure. For cold conditions and fine snow, lean toward blue wax and the BLUE roller's linear structure. For freezing temperatures and below, steer toward red wax and the RED roller's fine, broken structure. And for warmer conditions and moist snow, yellow wax and the YELLOW roller's aggressive broken structure are your best bet.
- For optimal base cleaning prior to waxing. - Rotation rate max. 800 rpm. - Use the Single Axle with cover.
Ergonomic Wax Iron enables easy waxing in all directions. Precise temperature adjustment from 100 °C to 160 °C. The extra-strong aluminum pressure cast plate for ideal heat storage has a curved rhomboid structure that improves the distribution of the wax and compression.
For sharpening and smoothing plastic scraper blades. For 3, 4, 5 and 6 mm blade widths and 100 mm file.
BLUE - structurite imparts a linear, shallow rill into the base. Helps glide in colder, dryer snow types. RED - roller for Structurite. Universal transverse for lightly transformed snow; ice and fresh powder with moisture present. YELLOW - roller for Toko Structurite. Coarse cross structure for wet snow, spring corn, falling wet snow.
First brush AFTER waxing. Medium, steel bristles are angled to reduce abrasion on ski base. Excellent addition to brush quiver if bronze brush is not enough for your first brush Rectangular Hand Brushes are great for travel and as an economical way to build a selection of ski tuning brushes Always wear safety tuning gloves while brushing out ski bases to protect your hands from sharp edges Specs: Red Body/Stainless Steel Bristles with Black Nylon Border Rectangular Hand Brush: 3 x 5 inches: 10 mm length (0.2 mm diameter) Bristles
A metal groove scraper with two sizings (diameters): one for Rossi grooves and another for normal reasonably-sized grooves. This groove scraper will not wear out after heavy use and very rarely slips from the groove by accident. This saves you many accidental scratches on your skis over the course of the season
Today’s cutting edge metal brush, the Toko Copper Brush refreshes a ski base, removes wax, and cleans. The Toko Copper Brush does all of this without damaging the ski base in any way. The Copper Brush should be used before waxing to refresh (or open) the base as well as clean it. This brush should also be used to brush out hard, cold weather waxes such as Blue.
Used to gently polish out wax after spray application, ensures that the wax isn't completely scrubbed off after curing. Recommend dedicating one brush per wax.
The Toko White Nylon Brush is a high-quality all around brush for revealing the structure of freshly waxed bases.
The Toko Horsehair Brush Bristles are quite fine, about 1/4 to 1/5 the size of a standard Nylon bristle (or the same size as the polishing brush bristles). At the same time, they are quite stiff and aggressive. These stiff, fine bristles make the Toko Horsehair Brush work well for removal of hard, cold weather waxes.
The nylon brush is an all round brush for alpine or nordic ski wax tuning. The bronze brush is designed to be the first brush used after scraping.
An innovative wax remover gel for cleaning the kick zones of classic skis.
Natural cork with fleece Great liquid wax tool!
Synthetic cork for corking Grip and Klister waxes.
Natural cork for corking Grip and Klister waxes and JetStream.
The Toko Plexi Blade Wax Scraper is a high-quality acrylic blade for cleaning your bases and scraping wax. Toko gave it a sharp edge that easily removes wax without damaging your bases like metal scrapers can.
For clean removal of wax residue from grooves on ski base.
Practical plastic tool for removing wax residue in grooves on edges and sidewalls. The edge can be used to remove klister.
Page 1 of 1